Turkey napkin ring
A colorful turkey badge with a printed napkin loop.
FREE FILE DOWNLOAD / THANKSGIVING
Thanksgiving 3D Print Files
Five festive designs for your fall table and home, ready as a Bambu Studio 3MF project and STL parts for other slicers.
$0.00Digital bundle · 1 ZIP file
Create or sign in to your free member account, then add this bundle to your personal file library. Your chosen files stay there for later downloads.
Add this free bundle to my library →The download includes the print and assembly guide and a saved-model preview.
FIVE DESIGNS
What you can print.
The ZIP contains one 3MF project with six saved plates, 19 STL parts, a print and assembly guide, and a model preview. The five designs are shown below.
Autumn leaf coasters
One leaf design you can print in orange, red, or cream. For cool drinks only.
Pumpkin place-card holder
A small pumpkin with a slot for a paper name card; the card is not included.
THANKFUL fridge magnet
A seasonal magnet design. Add two 6 × 3 mm magnets and glue after printing; hardware is not included.
Slot-together pumpkin
Two flat printed panels and a separate stem cap assemble into a standing pumpkin.
SAVED MODEL PREVIEW
See the full collection.
These renders show the saved models. Napkin and paper card are illustrative props.
BEFORE YOU PRINT
Check your printer setup.
The 3MF was prepared for a Bambu Lab P2S with a 0.4 mm nozzle and PLA. All six plates resliced without warnings, but physical printing and fit have not been tested. Open the 3MF as a project, review the plate, filament colors, and settings, then adjust for your printer. STL files do not contain color assignments or print settings.
DIGITAL DOWNLOAD
Files only. No shipment.
A 3D printer and filament are required. The place-card paper, napkin, two magnets, and glue shown or described are not included. These decorative PLA designs are not cooking tools; use the coasters for cool drinks, not hot cookware. Read the included guide before printing or assembling.