Custom Logo Shaped Hitch Cover for 2-Inch Receiver, Personalized 3D Printed Business Logo, Pin Included

Product details

Turn your own logo into a 3D-printed hitch cover with a face shaped around your design. The Shaw3D cover in the photos is a real printed example; your cover will feature the logo you provide.

HOW TO ORDER
1. Upload one to three clear JPG, PNG, WebP or PDF files of a logo you own or can use.
2. Add optional color or design notes. Fine lines, lettering, gradients and colors may be simplified for printing.
3. Choose quantity, add to cart, and complete checkout with Square. You can also order separately on Etsy.

WHAT YOU RECEIVE
• One custom logo-shaped PLA receiver cover.
• One included printed non-towing hitch pin.
The sample has a purple, white, gray and black face; your finished design will depend on your artwork and color choices. The outer profile follows the design where practical and includes a supporting border.

SIZE AND FIT
Made for a nominal 2-inch receiver. The example uses an approximately 122 mm (4.8-inch) insert with five pin positions and an outside width of about 49 mm (1.93 inches). The pictured Shaw3D face measures approximately 220 × 102 mm (8.66 × 4.02 inches); your logo shape may differ. Measure your receiver, pin alignment and bumper clearance before ordering. The shared receiver size guide shows a dog-shaped example; its insert measurements are for the same five-hole style.

DECORATIVE USE
This is a decorative cover. The cover and printed pin are not towing or load-bearing equipment; remove them before towing or using receiver-mounted equipment. Keep PLA away from high heat and inspect periodically.

MADE TO ORDER
Each logo is prepared and printed for your order. See the processing and delivery estimates at checkout. The real product is 3D printed and may show normal layer lines and small variations.